HVAC & Plumbing in Maryland Heights, MO

Completed preventive maintenance tune-up on outdoor air conditioning unit. Performed comprehensive system inspection including refrigerant levels, electrical connections, condenser coil cleaning, and airflow verification through return grille. Unit operational and ready for cooling season.

Installed a 50-gallon tall State ProLine gas water heater in basement utility area with proper venting and connections. Installation included pressure relief valve, ball valve for shut-off control, and humidifier valve integration into the plumbing system. All copper piping connections were completed to manufacturer specifications, unit was tested for proper operation, and installation complies with local municipal code requirements.

Responded to reported gas leak on 2-month-old furnace installation under first-year warranty. Upon arrival, conducted thorough inspection of gas supply lines, connections, and furnace components using leak detection methods. Verified and tightened all gas pipe fittings at furnace connection points, inspected gas valve assembly and associated hardware for proper installation and secure connections. Performed pressure test on gas lines to confirm system integrity and verified no active leaks present following corrections. All connections now secure and operating safely within manufacturer specifications.

Replaced deteriorated 6" B-vent flue cap on rooftop penetration. Removed heavily corroded existing cap showing significant rust damage at base and midsection, installed new metal rain cap with proper sealing to prevent water infiltration and ensure safe venting operation. System tested and confirmed operational upon completion.

Responded to service call for 9-year-old residential air conditioning system following home inspection report indicating insufficient temperature differential of 11 degrees versus required minimum of 17 degrees. Inspected outdoor condensing unit and identified bent components affecting airflow and system performance. Examined rooftop ventilation cap and confirmed damage as noted in inspection report, with deteriorated flexible rubber cap showing signs of wear and improper sealing. Documented all findings with photographs for reference. System requires component repair or replacement to restore proper temperature differential and optimize cooling efficiency.

Responded to no cooling complaint on 10-year-old residential air conditioning system. Upon arrival, performed diagnostic evaluation of outdoor condenser unit located in backyard and indoor air handler in attic space. Inspected refrigerant lines, electrical connections, and system components. Documented equipment condition with photos showing condenser unit with protective grille, air handler with foil-faced insulation, flexible ductwork, and refrigerant line set with service ports. System evaluated for proper operation and potential causes of cooling failure.

Completed comprehensive tune-up service on a 5-year-old residential air conditioning unit located at ground level. Performed standard preventive maintenance protocol including inspection of blower assembly, capacitor, and electrical connections. Verified all wiring harnesses were properly secured and electrical components were functioning within specifications, with particular attention to the capacitor and associated control wiring.

Completed comprehensive Supertune maintenance on two HVAC units at property coordinated through realtor. Performed full system diagnostics on Carrier air handler unit located in basement and outdoor AC condenser unit in backyard, both approximately 10 years old. Conducted electrical testing with multimeter, inspected blower motor assembly and internal components, checked all wiring connections, and verified proper operation of both heating and cooling systems. Replaced 20x20 air filter showing moderate dust accumulation. All systems tested and operating within normal parameters upon completion.

Completed comprehensive tune-up service on single outdoor air conditioning unit for Home Depot program. Performed standard maintenance protocol including inspection of condenser coil assembly, verification of refrigerant levels, electrical connection testing, and airflow assessment through ventilation grilles. Unit operational and running within manufacturer specifications upon completion.

Responded to service call for exterior electrical panel that had become detached from building structure. Upon arrival, inspected meter enclosure and conduit mounting system on exterior wall with vertical siding. Repositioned and securely reattached the electrical panel enclosure to ensure proper mounting and safe connection to the home's exterior wall, verifying all conduit connections and hardware were properly fastened and meeting code requirements.

Responded to service call for electric vehicle charging station estimate. Assessed existing electrical service panel and meter configuration mounted on exterior wall, evaluated garage interior space for potential charger installation location, and documented current electrical infrastructure. Provided customer with comprehensive quote for EV charger installation based on site conditions and electrical capacity requirements.

Completed annual cooling system tune-up on a 7-year-old residential air conditioning unit. Performed comprehensive inspection of indoor air handler and outdoor condenser unit, including examination of evaporator coil, blower assembly, drain pan, condenser coils, and refrigerant lines. All components found to be operating within normal parameters with routine maintenance performed to ensure optimal system performance for the cooling season.

Completed comprehensive cooling maintenance tune-up on HVAC system. Inspected internal components including control board, electrical connections, and wiring harness, confirming all connections secure and properly routed. Verified air return grille installation and airflow functionality. System tested and operating within normal parameters upon completion.

# HVAC Service Summary Completed routine preventative maintenance on a 10-year-old air conditioning system. Performed comprehensive tune-up including system inspection, replaced heavily soiled air filter with accumulated dust and debris, verified electrical connections and wiring integrity, and inspected blower assembly components. All warning labels and safety devices confirmed in place and legible. System operational and ready for cooling season. # Detailed Work Performed Arrived on-site during scheduled morning service window to perform annual air conditioning tune-up on existing cooling system. Upon initial assessment, accessed the air handler unit and identified a significantly loaded 16x25x1 synthetic pleated air filter requiring immediate replacement. The filter media displayed heavy dust accumulation with visible particulate matter embedded throughout the pleated surface, indicating extended use beyond recommended replacement interval. Removed and replaced the contaminated f

Completed comprehensive cooling maintenance tune-up on 7-year-old air conditioning system. Performed full system inspection including electrical components, capacitor, contactor, and control board functionality testing. Cleaned heavily soiled condenser coils which showed significant dirt and debris accumulation, inspected refrigerant lines showing surface oxidation, verified all electrical connections, and confirmed system operational status with normal cooling performance upon completion.

Completed comprehensive cooling system tune-up on 2025 air conditioning unit located on side of home. Performed full preventive maintenance inspection including refrigerant level check, electrical component testing, condenser coil cleaning, air filter evaluation, and thermostat calibration verification. All systems operating within manufacturer specifications with no deficiencies noted.

Completed comprehensive cooling maintenance on two 16-year-old air conditioning systems. Performed AC tune-up procedures on both outdoor condenser units and indoor air handler components, including inspection of blower motor assembly, electrical connections, and refrigerant service ports. All systems tested and confirmed operational upon completion.

Completed comprehensive cooling system tune-up on a 10-year-old single-stage air conditioning unit. Performed standard maintenance protocol including inspection of blower assembly, control board connections, refrigerant lines, and air filtration system. All electrical connections, wiring harnesses, and control board components verified secure and operational with no deficiencies noted.

Completed comprehensive cooling system tune-up on 8-year-old air conditioning unit. Performed standard maintenance protocol including inspection of condenser coil which showed significant accumulation of dirt and debris obstructing airflow through fins. Cleaned condenser coil, checked refrigerant levels, tested electrical components, and verified proper system operation. Customer enrolled in preventive maintenance agreement with automatic payment processing for future service scheduling.

Responded to a clogged drain complaint in a basement utility area. Upon arrival, assessed the basement utility sink and drainage system near the mechanical room and storage area. Cleared the obstruction from the drain line, restoring proper water flow and drainage function to the sink.