Plumbing, Heating & Air Conditioning Service in Fenton, MO

Completed comprehensive tune-up service on two HVAC systems located in basement with raised installations per Home Depot work order #F57809763. Performed full system inspection including control board evaluation, electrical connections check, and burner assembly examination on both units. Documented heavily soiled air filter requiring replacement due to significant dust and debris accumulation restricting airflow, which was affecting system efficiency and indoor air quality.

Responded to no heat call on Lennox unit located on first level. Performed diagnostic evaluation and determined system required filter replacement. Installed new air filter and verified proper airflow. Unit restored to normal heating operation and thermostat responding correctly.

# Service Report: No Cool Call - Residential Mobile Home Responded to no cooling complaint at residential mobile home. Upon arrival, performed diagnostic evaluation of AC system. Inspected outdoor condensing unit and found extensive corrosion and deterioration of internal components, including compressor assembly, refrigerant lines, and electrical connections. Unit exhibited significant rust and oxidation damage throughout cabinet and internal framework, indicating prolonged exposure to elements and end of service life. Accessed indoor air handler compartment and inspected air filtration system. Located 14x25x1 Filtrete filter in return air housing. Evaluated airflow pathway and internal ductwork connections within wooden cabinet structure. Based on comprehensive system assessment, outdoor unit displayed multiple component failures due to severe corrosion and age-related deterioration. Equipment condition deemed beyond economical repair. Documented equipment condition with photograp

# Electrical Maintenance - Home Audit Summary Performed complimentary electrical system inspection as part of membership benefits program. Conducted comprehensive evaluation of main electrical panel, verifying proper breaker operation, wire connections, and circuit labeling integrity. Documented panel configuration with detailed photography showing dual-column breaker arrangement with approximately 20-24 circuits, color-coded wiring (including phase conductors, neutrals, and grounding), and existing circuit directory posted on panel door. Inspection revealed generally organized wiring with proper bundling of neutral and hot conductors throughout the enclosure. Verified all breaker connections were secure and panel components showed no visible signs of overheating, corrosion, or damage. Noted handwritten circuit notes posted adjacent to panel for homeowner reference. All findings documented photographically for service records, with no immediate safety concerns or code violations iden

# Electrical Maintenance - Home Audit Summary Completed comprehensive electrical safety inspection of residential property. Performed circuit testing at exposed outlet in unfinished space using professional outlet analyzer, confirming proper wiring configuration and grounding integrity. Conducted thorough examination of main electrical panel, verifying breaker functionality, wire routing organization, and connection integrity across all circuits. All electrical components inspected showed proper installation with adequate wire management, correct neutral and ground bar terminations, and no visible signs of overheating, corrosion, or code violations. System found to be in safe operating condition.

Performed annual cooling maintenance on 11-year-old Arcoaire HVAC system. Inspected outdoor condenser unit and indoor furnace components, confirming proper operation and connections. System is functioning correctly with no issues identified during the comprehensive tune-up service.

Successfully installed a new 75-gallon gas tall water heater in the basement utility room, properly connecting all required plumbing and venting components to existing systems. Completed installation of customer-supplied shower head in second floor primary suite. Applied permit identification sticker #26PLU-05133 as required.

Successfully installed a new 40-gallon gas water heater with proper copper piping connections for hot and cold water lines. Removed old unit, positioned new heater, and secured the expansion tank to the ceiling joists with metal brackets. All connections were properly fitted and tested for leaks.

Performed scheduled heating tune-up on furnace unit (under 10 years old) located in basement. Inspected thermostat functionality and control board connections, ensuring all wiring was secure and properly connected. System was tested and verified to be operating within normal parameters with no issues found.

Responded to service call for AC unit not cooling properly. Inspection revealed significant dust accumulation in the ventilation system and exterior deterioration of the condenser unit casing, with visible peeling and separation of the outer layer. Cleaned ventilation system and recommended replacement of damaged exterior panels to prevent further system degradation.

Removed existing humidifier from furnace and sealed the opening as requested. Inspected copper piping system showing signs of oxidation and corrosion at connection points. Examined electrical connections and terminal wiring on HVAC control panel, noting proper wire connections with appropriate wire nuts in place.

Conducted a free electrical inspection of the residential panel system mounted on concrete basement wall. Inspected main electrical panel with dual columns of circuit breakers, verified proper labeling of circuits, and examined cable routing through ceiling joists. Panel appeared to be functioning normally with no immediate safety concerns observed.

Performed scheduled seasonal tune-up on 6-year-old Lennox furnace. Conducted thorough inspection using camera equipment to examine internal components, noting presence of condensation in ductwork. System was cleaned, tested, and verified to be operating within manufacturer specifications.

Performed scheduled heating tune-up on 6-year-old York furnace located in basement. Inspected system components, ductwork, and connections; unit is functioning properly with no issues detected. Filter was checked and system is operating within normal parameters.

Responded to service call #1291257 for thermostat error with safety warning indicator. Inspected internal mechanical components and connections, finding all parts in normal working condition with no visible damage or corrosion. Resolved safety error and verified system operation.

Installed dual-head motion sensor security light on exterior soffit above garage entrance. Mounted fixture securely to white ceiling surface and verified proper operation of both light panels and motion detection functionality.

Diagnosed and repaired 16-year-old Lennox furnace that wasn't producing heat. Inspected system components including the Honeywell thermostat and verified proper operation after service. Recommended routine maintenance to extend unit lifespan.

Conducted comprehensive electrical inspection of home outlets and switches using Milwaukee voltage tester. Verified proper wiring configuration and confirmed outlets were operating at 122 VAC with correct hot-neutral orientation. All tested circuits showed normal functionality with no detected faults.